Sluice/Penstock Gates
- Products
- Sluice/Penstock Gates
Sluice/Penstock Gates
KLN Cast Iron Sluice Gates are used in applications where safety and reliable performance are essential (dams, tidal environments, water treatment plants) and where outstanding product longevity is desired.
KLN cast gates are preferred for high-head and high debris (water treatment) environments as well as for critical gateways in treatment plants. Each gate is custom built to your requirements.
Open Channel Sluice Gate
These are generally used in open channel of water or sewage.
These gates are fixed / mounted between two parallel walls used to regulate the flow within as well as in and out of an open channel.
These are suitable for seating as well as unseating water head but the height of water in both cases should be less than height of shutter.
These are light weight, economical Gate assemblies for faster erection.
These gates can be provided with flush bottom wall mounted invert bottom arrangement.
Suitable coating for corrosion resistance, weather resistance, and salt water resistance will be adopted for long life.
Stop Log Gate
Stoplogs are generally used in floodgates to adjust water level or discharge in a river, reservoir, canal.
It is also used to isolate equipments such as pumps, screens, service gates for maintenance and repairs where absolute sealing out of water is not necessary.
The stoplogs are designed for industrial and domestic waste environments to work against corrosion, ease of operation.
Toplogs are open channel level controlling gates where single multiple logs (Beams) are inserted in channel. Logs can be of Mild Steel, Stainless Steel, Aluminium, Wood, HDPE.
Sluice Gate Thimble Mounted
This Sluice Gate is very robust and can be mounted on pipe flange, wall with flange back or flat back mounted with thimble.
Due to wall thimble is grouted in concrete. This gate can be easily mounted and dismounted with nut bolts fitted on thimble.
This sluice gate is used where there is minimal leakage. This gate is checked in the store for the desired water pressure on the wall to be the actual leakage according to the quality standards.
Sluice Gate Wall Mounted
These can be operated manually by hand wheels, with or without gears, pneumatically or by electric actuators.
The gate is used for water supply drop and purification work, sewage plant, drainage water, irrigation, canal. Hydroelectric collection, aqua duct and tail rack.
The spindle height must be provided for the 2 m long guide bracket for the extension rod, so that non-rising spindle thrust bearings are provided.
Frame yoke for safe transmission when opening and closing doors.